Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Access to the esa_snappy plugin

The esa_snappy plugin has been implemented as a dedicated SNAP module. As for the other SNAP modules, the corresponding source code is available from Github .

Installation of the esa_snappy plugin

The esa_snappy plugin is one of the ‘internal’ SNAP plugins which are automatically installed during the SNAP installation. Thus, no further user action is required.

Configuration of esa_snappy from the Command Line

Open a command line window (shell, terminal window on Unixes, cmd on Windows) at the bin folder of the SNAP installation directory. Now type

Unix/MacOS:
$ ./snappy-conf <python-exe>

Windows:

$ snappy-conf <python-exe>

This will generate the Python module esa_snappy configured for the current SNAP installation and your Python interpreter <python-exe> into the .snap/snap-pythondirectory of the user home directory. The parameter <python-exe> must be the full path to the Python interpreter executable which you want to use with SNAP (supported versions are 2.7, 3.3 to 3.10, we recommend to use a fairly recent version).  If you want the esa_snappy module to be placed somewhere else use:

Unix/MacOS:
$ ./snappy-conf <python-exe> <esa_snappy-dir>

Windows:

$ snappy-conf <python-exe> <esa_snappy-dir>

When you see as output something like below, the configuration was successful:

The command might hang when finished and does not return to the prompt. In this case press CTRL + C and answer the question if you want to abort with no ('n').

Known issues and pitfalls

Configuration fails with empty stack trace

This issue has been observed while trying to configure esa_snappy on Windows as described above. The output of snappy-conf may look like this:

Configuring ESA SNAP-Python interface...

Configuration failed!

Error: Python configuration error

Full stack trace:

The reason for this could be that you have permanent environment variables PYTHONHOME and PYTHONPATH set and pointing to a Python installation different to the one which you are trying to use with esa_snappy. If not ultimately needed, we recommend not to use PYTHONHOME and PYTHONPATH.

Configuration failed with exit code 30

This error has been occasionally observed during the esa_snappy installation and Python
configuration on Linux. Here, the environment variable LD_LIBRARY_PATH is likely not set
correctly, and thus the shared library for the JVM cannot be found. This can be solved by
performing the following steps:

  • `locate libjvm.so`

  • Output is, say, `/path/to/libjvm.so`

  • `export LD_LIBRARY_PATH=/path/to/:${LD_LIBRARY_PATH}`

  • Re-try the installation

Cannot open shared object

After a successful esa_snappy installation and Python configuration, you might get an error
similar to

`ImportError: libjvm.so: cannot open shared object file: No such file or directory`

when doing `import jpy` within your Python script. Again, the shared library for the JVM cannot be found. This might happen if the LD_LIBRARY_PATH has previously been set correctly, but was changed or not set permanently. In this case, set the LD_LIBRARY_PATH as described above and restart your Python script.

Configuration of esa_snappy during SNAP installation

During the SNAP installation, a dedicated screen for the Python configuration will appear. Follow the instructions given there.

Configuration of esa_snappy from GUI

The option to configure esa_snappy from a graphical interface in SNAP Desktop will be provided in a future SNAP release.

Testing esa_snappy

To test esa_snappy,

$ cd <esa_snappy-dir>
$ <python-exe>     (start your Python interpreter)

Then try the following code:

from esa_snappy import ProductIO
p = ProductIO.readProduct('esa_snappy/testdata/MER_FRS_L1B_SUBSET.dim')
list(p.getBandNames())

This approach only works if the current working directory is in the <esa_snappy-dir>. To generally make use of snappy you need to do one of the following configuration steps.

Usage of esa_snappy from Python

To effectively use the SNAP Python API from Python, the esa_snappy module must be detectable by your Python interpreter. There are a number of ways to achieve this. 

  • To make esa_snappy permanently accessible, you could install it into your Python installation. On the command line (shell, terminal window on Unixes, cmd on Windows), type

$ cd <esa-snappy-dir>/esa_snappy
$ <python-exe> setup.py installThis might require root privileges on Unix systems and results in a esa_snappy folder in usr/local/lib/python/dist-packages/

  • If you encounter any problems with this approach, you can also try to copy the <esa-snappy-dir>/esa_snappy directory directly into the site-packages directory of your Python installation.

  • Or you could also temporarily or permanently set your PYTHONPATH environment variable:

export PYTHONPATH=$PYTHONPATH:<esa-snappy-dir>   (on Unix OS)
set PYTHONPATH=%PYTHONPATH%;<esa-snappy-dir>    (on Windows OS)

  • Finally, you could also append <esa-snappy-dir> to the sys.path variable in your Python code before importing esa_snappy:

import sys
sys.path.append('<esa-snappy-dir>') # or sys.path.insert(1, '<esa-snappy-dir>')
import esa_snappy
  • In case you seek for a generic solution without needing to set <snappy-dir> you may automatically find snappy through the 'USERPROFILE' environment variable. Note that this solution requires esa_snappy to be located at the value of 'USERPROFILE':

import os
esa_snappy_envar = 'USERPROFILE'
envs = os.environ
if not esa_snappy_envar in envs.keys():
	raise Exception('Can’t find esa_snappy')
else:
	esa_snappy_dir = os.path.join(envs.get(esa_snappy_envar), '.snap', 'snap-python')
sys.path.append(esa_snappy_dir)
import snappy

Change the Memory Settings

Within <esa-snappy-dir>/esa_snappy a file named esa_snappy.ini is located. Here you can change how much memory esa_snappy can use.

Change the line from

# java_max_mem: 8G

to e.g.

java_max_mem: 10G

This means that esa_snappy can use 10GB of your RAM. A recommended value is 70%-80% of the available RAM in your system.

  • No labels